At linear slides type TVM the two sliding parts (interior- and exterior part) has got a different length. Through the spindle the moveable sliding part can be moved linear. The spindle version has got many options. For example clampings, position indicators or micrometerscrews.
The sliding parts can be produced in grey cast iron (standard) or alternative aluminium. Stainless-steel upon request.
Informations about the height and permissible loads please read in the PDF.

On request different special verions are possible, please contact us.


  • Smooth running
  • Very good emergency running characteristics
  • Wear-resistant
  • Robust against dirt and impact
  • Long service life
  • Very good vibration damping
  • Economical
  • Good absorption of lateral forces
  • Cross table assembly possible


  • Testing devices
  • Control technology
  • Tooling machine
  • Precision engineering


Material Standard version grey cast iron EN-GJS-400-15, alternative aluminium, other materials upon request
Min. & max. width 30 - 300 mm
Coefficient of friction 0.04 - 0.08 (depending on the lubrication)
Lubrication Usual commercial guideway oils
Sealing Insensitive to dirt, optionally available with end wipers in case of heavy dirt, wipers on all sides also possible
Slide execution Surfaces ground, optionally chemically nickel-plated or natural anodized
Mounting hole Without (standard), optionally with standard mounting holes or customer mounting holes
Spindle execution Ground metric standard spindles, other spindles on request
Pitch accuracy +/- 0.02 mm on 300 mm Length
Maintenance Low maintenance
Special dimensions and materials Upon request


    Privacy notice

    The provided data and information will be used for the processing the contact request and will be saved in case of follow-up questions. The data will be saved until the purpose for saving the data no longer applies or you request us to delete the data. Please also note further information on our Privacy Policy.