Cross roller guide type R

  1. Home
  2. Products
  3. Guide rails
  4. Cross roller guide type R

CROSS ROLLER GUIDE TYPE R

Cross roller guides type R consist of two hardened rails which are supported by a cross roller cage. The low friction coefficient of 0.003 is possible due to the roller bearings. The rollers are held by a plastic cage as standard.

Accessories such as end pieces, end screws and wipers can be found at “Options”.

Various special designs are available upon request,
please contact us.

ADVANTAGES

  • Smooth running
  • Coefficient of friction 0.003
  • Stick-slip free run (no start-up friction)
  • Minimal wear
  • High load capacity
  • Highest precision
  • Compatible with TV and NO guides
  • all standard types from stock

AREAS OF APPLICATION

  • Ultrasonic welding
  • Grinding machines
  • Woodworking machines
  • and many other

TECHNICAL DATA

Material Tool steel (standard version)
Material hardness 60 - 62 HRC
Admissible operating temperatures - 20° C to + 80°C (short-term +105°C)
Max. Acceleration 8 m/sec²
Max. speed 50 m/min
Min. & max. width 4 - 28 mm
Coefficient of friction 0.003
Lubrication Rolling bearing grease based on lithium soap
Rolling elements Rolls with Ø 1.5 - 12 mm, optional balls
Sealing Sealing against solid and liquid dirt is required, optionally available with end wipers
Special dimensions and materials Upon request

CONFIGURATOR

Klicken Sie auf den unteren Button, um den Inhalt von ero-embedded.partcommunity.com zu laden.

Inhalt laden

YOUR REQUEST











    Privacy notice

    The provided data and information will be used for the processing the contact request and will be saved in case of follow-up questions. The data will be saved until the purpose for saving the data no longer applies or you request us to delete the data. Please also note further information on our Privacy Policy.